PE material hot pressing machine

1: Hot pressing 2: Edge trimming 3: Heating method: Electric heating 4: Heating temperature: 100-150

It adopts four-column and three-plate open space, and the four columns are matched with precision sewing guide sleeves. It is a professional equipment developed for the IMD industry (in-mold decoration injection molding technology) and the forming of thin films, PET, PVC and other sheets. It uses far-infrared radiation to evenly heat the sheet, and then passes through the constant temperature device and the oil cylinder pressure to form it instantly. This machine can be used for both forming and punching as long as the mold is replaced.

1. The machine can reach a maximum speed of 250MM/s, and the impact noise does not exceed 80 decibels, which is equivalent to a normal conversation in the office.

2. The carbon fiber heating tube has a rapid heating, small thermal lag, and uniform heating. Its life (continuous burning) is ≥ 6000 hours. Long-term operation of the machine can enhance human blood circulation, accelerate metabolism, and enhance immunity.

3. This machine can be used for both molding and punching as long as the mold is replaced.

4. The heating element of this machine is completely sealed with heat insulation cotton. When in standby mode, the external radiation power accounts for only 10% of the heating power. The external radiation power of conventional IMD hot pressing machines on the market is as high as 50%. In the hot summer, 10 4KW conventional IMD equipment needs to be equipped with 10 5P air conditioners. However, our hydraulic IMD equipment only needs 2 units.