What should you pay attention to when using CNC hydraulic press?
First of all, you should pay attention to safety matters when using CNC hydraulic press. Before using a CNC hydraulic press, operators must receive relevant operating training and be familiar with the working principle, structure and functions of each component of the equipment. Operators should wear protective equipment, such as hard hats, goggles, gloves, etc. during operation to ensure their own safety.
Secondly, before using the CNC hydraulic press, you need to check whether all parts of the equipment are working properly. Check whether there is oil leakage in the hydraulic system, check whether the electrical system is normal, and check whether the mechanical transmission system is smooth. At the same time, it is also necessary to check the positioning accuracy of the equipment and whether the work surface is flat.
In addition, you need to pay attention to maintenance matters when using CNC hydraulic machines. Regularly check the lubrication system of the equipment to ensure that appropriate amounts of lubricating oil are injected into each lubrication point to maintain the good working condition of the lubrication system. Clean the outer surface of mechanical equipment regularly to prevent dust or debris from entering the equipment and affecting its normal operation.
In addition, operators need to pay attention to operating matters when using CNC hydraulic machines. Operators should operate according to the operating procedures of the equipment and set the parameters of the equipment according to actual needs. During the operation, pay attention to the working status of the equipment, such as the pressure, temperature, etc. of the hydraulic system, and detect abnormal situations in time and deal with them in a timely manner. At the same time, be careful when operating tools to avoid accidents.
In addition, when using a CNC hydraulic press, you need to pay attention to its working environment. The CNC hydraulic press should be placed in a well-ventilated, dry and clean place. Debris and accumulated water should be removed from the working environment to avoid affecting the normal operation of the equipment. If the device uses a power supply, the voltage of the power supply should match the device to avoid damage to the device due to voltage instability.
In addition, during the use of CNC hydraulic press, regular maintenance should be carried out. Regularly check whether various parts of the equipment are severely worn and need to be replaced. Regularly replace oil seals, oil nozzles, oil pipes and other wearing parts to ensure the normal operation of the equipment. At the same time, it is also necessary to regularly check the working status of the equipment's hydraulic system, electrical system and mechanical transmission system to maintain the good operating condition of the equipment.