Are there any pressure requirements for the hydraulic cylinder of a high-precision hydraulic machine?

First, we need to summarize the main reasons why the hydraulic cylinder of the high-precision hydraulic machine cannot maintain pressure, and then take targeted measures. In fact, the main problem causing pressure differences is leakage in the cylinder and control valve. Then, the basic measures we can take when solving this problem is to minimize the occurrence of leaks. However, in actual work, leakage problems will exist more or less, which will cause the pressure to slowly decrease.

Therefore, if the requirements are more stringent, we can add oil to achieve the pressure maintaining effect. For example, if the internal and external leakage of a hydraulic cylinder does not cause pressure problems, then we must not only improve the sealing conditions, but also improve the manufacturing accuracy and matching accuracy of each component as much as possible to reduce the internal degree of leakage. and external leakage.

If the leakage is caused by the control valve used, then we need to replace the control valve with a more suitable one, and in the hydraulic cylinder system, the leakage points should be reduced as much as possible. This requires that the number of control valves and connections be controlled as much as possible during design.

Regarding the leakage problem, if we want to ensure better pressure maintaining effect, then we must take refueling measures. In other words, in the hydraulic cylinder system, we need to constantly replenish pressure oil. Typically, this method is suitable for systems requiring longer hold times.

In order to ensure the long-term normal use of the hydraulic cylinder filter, we must meet several requirements in daily use. First, we need to insist on testing the pressure difference between the inlet and outlet of the hydraulic cylinder filter. Then, make judgments based on specific detection situations, and find and deal with problems in a timely manner.

Under normal circumstances, if a large pressure difference is found, it may mean that the oil temperature in the hydraulic cylinder is low, the viscosity is high, or the oil is emulsified, or the filter element may be seriously contaminated or replaced. If you notice a small pressure difference, it may be due to a damaged filter element, a poor installation that may be bypassing the filter inlet and outlet, or it may be caused by insufficient oil flow.